GATES 24442 Specifications |
---|
Centerline Length | 36" | Centerline Length (ft) | 3 | Centerline Length (m) | .91 | Construction | 4-Ply | End 1 Inside Diameter | 2.625" | End 2 Inside Diameter | 2.625" | Material | EPDM | Molded | No | Working Pressure (psi) | 75 |
|
|
- Designed for severe operating conditions found on stationary engines, construction
equipment and off-road vehicle applications.
- Engineered to resist electrochemical degradation (ECD®) – the
leading cause of hose failure.
- Four plies of woven, heavy-duty fabric reinforcement.
- Nitrile tube specially compounded to handle common coolants and additives.
- Neoprene cover resists heat, abrasion and oil.
- Handles higher temperatures and resists petroleum additives.
- Resists water loss from water permeating through the hose wall and cover
-- a distinct advantage over silicone.
- Temperature range: –40°F to +212°F (–40°C to +100°C)
- Packaging: 3-ft. lengths.
- Exceeds SAE 20R1 (Class B Tube, Class C Cover, Heavy Wall) specifications.
Caution: Not recommended for gasoline or diesel transfer applications.
Cooling System Hose Standards
SAE |
- SAE 20R1: Heavy duty service; standard wall or heavy wall
- SAE 20R2: Heavy duty service with embedded wire for kink and vacuum resistance
- SAE 20R3: Normal service heater hose (ID under 1 inch)
- SAE 20R4: Normal service radiator hose (larger IDs)
- SAE 20R5: Normal service with embedded wire for high flexibility and vacuum resistance
|
CLASS |
- Class A: High temperature resistant (e.g. silicone)
- Class B: High oil resistant (e.g. nitrile)
- Class C: Medium oil resistant (e.g. neoprene)
- Class D-1: Low oil resistant; improved service (e.g. EPDM)
- Class D-2: Low oil resistant; standard service
- Class D-3: Low oil resistant; high temperature resistant (e.g. p-EPDM)
|
*
EC suffix: Electrochemically resistant rubber;
HT suffix: High temperature resistant rubber (>125°C)
|
OEM / Interchange Numbers: F3HZ8286G |
|