PETERSON MANUFACTURING
Más Información para PETERSON MANUFACTURING B150143
Continuar Haciendo Compras
 
PETERSON MANUFACTURING B150143  
No Disponible
Precio
Depósito
Empacar
Total
PETERSON MANUFACTURING B150143close
<
>
Part image
Especificaciones de PETERSON MANUFACTURING B150143
Altura (pulg.)2.72
Longitud (pulg.)3.66
MaterialCromo
Tipo de MontajeSuperficie
Formarectangular
Ancho (pulg.)2.17
Serie 150 lámpara se fija en la carcasa para formar una sola unidad. use 150C o 153C Luz LED para luz de placa de matrícula Aplicación; Cromo Soporte

What are the advantages to LED versus incandescent lights?

Unlike traditional, incandescent lights that use bulbs, LED lamps do not use delicate wire filaments that stretch, weaken and eventually fail.

  • LED lamps last longer because they withstand road vibration and shock much more effectively than bulbs.
  • The life expectancy of an LED is 100,000 hours or six times that of an average incandescent bulb.
  • Besides the longevity, LED lamps consume significantly less power than incandescent lights. The amp draw of an LED can be as low as 1/10th that of an incandescent light. The lower amp draw means more power for other critical electrical needs.
  • LED units are also growing in popularity because of greater emphasis on safety issues.

When a vehicle’s brake lights are applied, LEDs respond instantaneously and provide a brighter, more focused illumination. Incandescent lights take about a quarter of a second to get to 90% full brightness.

A study by the University of Michigan’s Transportation Research Institute found that LED lamps respond on an average 2/10th of a second faster than standard incandescent lamps. Using test results at 65 mph, LEDs improved reaction time and decreased braking distance by 16 feet.


Atención Clientes de California - Advertencia: cáncer y/o daño reproductivo - www.P65Warnings.ca.gov


Atención Clientes de California - Y


Información de Garantía:
12 meses
Detalles de Garantía